Instructions for use of Unweighting System

How unweighting system Work ?

Unweighting System is using a unique mechanical structure,to help patients stand up from his wheelchair: removed prior to a predetermined portion of the weight load from the patient's lower extremities,to ensure that patients can have proper standing and walking.

Working conditions: Working Conditions and Equipment Performance

A) Ambient temperature: 5C ° ~ 40C °;

B) Relative humidity: less than 80%;

C) Control: pneumatic controls;

D) Air pressure: 0.8Mpa;

E)Size: 1420 × 1250 × 2700mm

F)Weight lifting range: 0 ~ 500mm;

G)Armrest adjustment range: 0 ~ 240mm.

Mainly structure and composition
a) crossbar;

b) pillar;

c) base chassis, handrails, loading lifting;

d) castors

The scope of application
Suitable for walking ability of patients with disorders aid training.

Contraindications

Acute infectious diseases, severe heart disease, severe hypertension, severe anemia, arteriosclerosis, pregnancy and menstrual period women, drug skin allergies, skin damage, pulmonary dysfunction, severe diabetes, osteoporosis (other clinical ban weight training condition).

Caution, warning and informational content
Please carefully read the instructions in this section, in order to achieve more desired therapeutic effect.

1. Before using this equipment, rehabilitation division should read the product manual, are familiar with its performance requirements and methods of operation, and no-load operation inspection equipment, proven product in good normal state.

2. Training should be under the guidance of the rehabilitation division, will not be allowed to exercise in patients with gait training arrangements.

3. Training shall be subject to "progressive" principle, and gradually increase the load-bearing lower limb and training time.

4-The load-bearing harness connector must be fully inserted into the insurance deduction.

5. The load-bearing harness found damaged should be replaced, can not continue to use.

6. gait training should be carried out on a solid flat surface.

7. Before you begin, you must first adjust the air pressure regulating valve to "0".

8, the first adjustment regulator is prohibited, and then open the Run switch (to prevent a sudden rise in the belt)

9, after the completion of treatment, can not be run directly off switch bleed shall reverse adjustment regulator, slowly adjusted to reduce the weight of 2 kg or less, loose straps untied. (To prevent a sudden loss of control patients fall)

Installation Instructions
1, when the product out of the box Never brutal demolition, pay attention to packaging and equipment protection.

2, after unpacking the product in accordance with the packing list on the product and its annex okay check. Xiangyu any errors, please contact your dealer or direct contact with Xiangyu company.

3, on both sides of the crossbar around the stent device and the base bracket, the top operations connected with the header bracket bracket manifold (when mounting base bevel facing outward)

4, the air compressor trachea and weight loss device holder inlet port.

5, the armrest down into the socket in the end seat armrest, height adjusted to fit with the top wire locking handle.

6, the weight loss waistline directly linked to the bar, and then check the lock, you can tie is good.

Instruction manual

1, the four casters lock to prevent instrument movement.

2, the regulator knob counterclockwise to "0", the switch to turn off the unit to the lowest weight loss, weight loss waist adjustment straps, the weight loss in patients with raised waist suitable height, adjustable armrest to the appropriate height .

3, will vest and legs tied to the patient with a fixed, fixed.

4, depending on the desired weight reduction in patients, the first turn on the switch, and then slowly adjust the regulator knob clockwise to rise, counterclockwise to decrease.

5, observe the weight indicator readings, after reaching the desired weight reduction, press the down regulator regulator locking knob to adjust to the appropriate length of the seat belt, can be used after locked.

Maintenance and repair
1, all parts of the machine should be kept clean.

2, when you stop working, turn off the power in a timely manner.

3, fails to ask a professional service personnel, need the company please contact the dealer or the service department of the company providing the service, must not be arbitrary overhaul.

Rehab-Go updates lateset rehabilitation&Physio Medical Equipment News

Rehabilitation is a needed department in the hospital or in any treatment .Should be have qualify rehab&physio therapist in hospital but also equip with well set rehabilitation equipment is very important ,Such as gait training equipment , treatment table/couches ,unweighting system ,standing aid ,gait trainer etc equipments we offering now .

www.rehabmedicalequipments.com